Our digital controller allows customers to set the heat level exactly to their preference for ultimate comfort and energy savings. Installation is simple and the solid-state controller is maintenance free.
Any combination of heaters totaling 6000 watts or less may be controlled with either 110/120 volt or 208/240 volt and will extend emitter life by 30%. With a 1 to 10 setting feature the enclosure is water resistant for outdoor usage.
The SMaRT 60 Controller may also be combined with our Wireless Handheld Remote, our Hardwired Temperature Sensor, or our Occupancy Sensor (Motion) options for the ultimate user experience.
Controller will operate:
One 6000 Watt, 208-240 VAC Heater
Two 3000 Watt, 208-240 VAC Heaters
Three 2000 Watt, 208-240 VAC Heaters
Four 1500 Watt, 208-240 VAC Heaters
Max load for this controller:
6000 Watt total, 208-240 VAC 50/60 Hz, 50 AMP
11”W x 3-1/8”H x 6-5/8”D
Temperature on/off set point
41°F to 77°F
Factory set on/off point
Enclosure Material/Protection Rating
UL94 certified enclosure, IP65 Water Proof for outdoor/indoor use
12"W x 4"H x 8"D
CONTROLLER MUST BE INSTALLED BY A CERTIFIED ELECTRICAN TO LOCAL/STATE AND FEDERAL ELECTRICAL CODE
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials about the acceptable installation of this heating appliance. UL or CSA Certified waterproof use junction box to be supplied by electrician.