The Solaira Variable Heat Controller is a weatherproof, digital, solid-state power control designed with the latest technology to provide a convenient way to variably adjust output on electric appliances (high power infrared heating or lighting). It allows for variable adjusting of the appliance from 10 to 100% of the available power.
The control is simple and effective with the on/off switch that will turn the appliance on to the last power setting when it was turned off and the “SOFT START” feature will bring the power up slowly to the emitter adding an estimated 25% to the emitter life. The up/down controls are simple to use and the heater or light level is shown on the LED front panel.
Controller will operate:
115 to 120VAC:
One (1) quartz lamps totaling up to 1.6kW
One (1) quartz tube totaling up to 1.6kW
208 to 240VAC:
One (1) or two (2) quartz lamps totaling up to 3.2kW
Up to two (2) quartz tubes totaling up to 3.2 kW VAC
Max load for this controller:
1600 Watt (5,459 BTU), 115-120 VAC, 15.5 AMP Quartz Emitter OR Tube AND HID technology
3200 Watt (10,918 BTU), 208-240 VAC, 15.5 AMP Quartz Emitter OR Tube AND HID technology
6”W x 6”H x 3”D
Replacement Parts Available:
CONTROLLER MUST BE INSTALLED BY A CERTIFIED ELECTRICAN TO LOCAL/STATE AND FEDERAL ELECTRICAL CODE
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials about the acceptable installation of this heating appliance. UL or CSA Certified waterproof use junction box to be supplied by electrician.